- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"
Universal Fit The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, Android Devices, and most larger style smartphones with protective cases. Compatible with devices/cases up to: 7.8 x 3.5 x 0.5 inches (H x W x D) Easy, Instant Removal Don't waste time prying your smartphone out of bulky holders or changing between cycling-specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Positioning On Your Terms Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Weather Protection Bag (Included) Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. Securing Cam Lock The securing cam lock adds additional security to your device during those extra bumpy moments.
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
$24.99 - $29.99
The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter
Keep an eye on your speed, distance and more with wireless ease when Bontrager's GOTime cycling computer is clipped to your bars. Set-up is a breeze; the large LCD screen is easy to read and the integrated clip mount allows you to instantly remove the computer and throw it in your pocket when you reach your destination.
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
- Micro Mount for Phones - Aluminum and composite construction securely holds any phone with any case for minimalist profile - Unique patent-pending design with proprietary stretch material grips your phone - Easy mounting under any standard stem. - Tighten to stem cap 6Nm torque.
Universal phone holder with quick release bracket for diameters 24mm to 38mm and works great with any phone. Fits with aftermarket cases for phones such as iPhone X, iPhone 6,7,8 & iPhone X, XR, XS, X Max, X Max R. Holder is on a ball socket so can rotate 360 degree’s for viewing at any angle. Can use as an out front mount and comes in handy when you have lights, or other devices mounted on handlebar, because will provide a few inches of clearance from bar. Works on Bicycles, E-Bikes, ATV’s, Motorcycles, Snowmobiles, and UTV’s.
$17.99 $34.99 49% Off
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
This handy accessory mount can be installed on the boom of your TerraTrike. Perfect for accessories like headlights, iPod mounts, computers, etc. Compatible with any TerraTrike except the Rover model. - Designed specifically for mounting on the booms of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.
Use Garmin's elastic bands with your quarter-turn bike mount to attach your compatible Edge to your bicycle's stem or handlebars.
The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights
- Sliding closure helps keep sweat and precipitation away from valuables - Large, clear, center window allows easy operation of touch screen - Compatible with most smartphones - 7.5"" (19cm) x 4.5"" (11cm) wide
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
The Tablet Stand from BiKASE is a freestanding Tablet holder designed for indoor training. In order to take advantage of the many sizes of bikes and heights of riders, the Tablet Stand uses a telescoping tripod design to accommodate any rider. On top of the height adjustment, the tablet clamp can rotate a full 360°. Don't let you tablet go to waste during your grueling training sessions! Put it to work with the tablet stand from BiKASE. Features: - Works with iPad Mini, iPad, Surface and most tablets. - Telescoping stand - Full rotation - Comes with carrying bag
Using super heavy duty rubber, the TrailKASE is designed to conveniently fit any size phone with or without a case on your bicycle while you ride! Using an 1/8 turn (10 o’clock to 12 o’clock), the TrailKASE securely attaches to the handle bar bracket (included). By simply wrapping the rubber case around all 4 corners of your phone, your phone is secure and provides 100% visibility to your screen.
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr SRM Mount for a clean, flush look that places your SRM Head Unit exactly where you want it. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for SRM head unit - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
The ultimate in GPS technology, the new Mega XL is a must have device for serious road, gravel and mountain bike riders and racers as well as long distance adventure riders. Its 2.7-inch, 240x400 high-resolution display is 50-percent larger than the Super GPS and includes the option of vertical or horizontal viewing modes. - Durable, composite construction - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Barometer and accelerometer - Simple setup through Lezyne Ally phone app - Import tcx and gpx files - Trainer Mode - Multiple bike profiles - Full navigation - Custom route building - Intuitive four button operation - Lithium polymer battery provides up to 48 hours of runtime - Micro USB rechargeable - Stores up to 800 hours of ride data - Customizable fields and page count (up to 10 fields) - On screen preloaded maps - Custom alerts and auto presets - Extremely weather resistant - Includes X-Lock Standard Mount
Page 1 of 3 Next page