Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Shimano Alivio 9-Speed Cassette
$28.99 - $29.99
- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG
Shimano Shimano 105 front derailluer FD 5504 Triple 9 speed
$47.98 $49.99 4% Off
Free shipping NOTE: If your bicycle has seat tube that uses a 34.9mm clamp size front derailleur, DO NOT PURCHASE THIS DERAILLEUR, 34.9mm is larger then 31.8mm and it is physical impossibly to make it fit . The 105 5504 9 speed triple front derailleur *Made for 9 speed drive trains *Works on older 7&8 speed systems. *It is uses the down pull cable design. *It works with all Shimano road shift levers. *works with classic 52-42-30 front chain ring set up's and others that new Shimano derailleurs can't . *Fits frames with 31.8mm seat tubes and can be used with shims to fit 28.6mm seat tubes (shims not included) Brand new, old stock Shimano 105 9 speed triple road front derailleur. This is a brand new Shimano 105 9 speed road front derailleur; part # is FD-5504. It is designed to work with a 52-42-30 triple crank set and others, clamp diameter is 31.8 mm (1 ¼), you can also clamp this derailleur on seat tube that is 28.6mm (1 1/8) with the use of a front derailleur shims (this part is not included with this derailleur but almost all bicycle stores stock them). It is a bottom pull Derailleur with means the cable pulls down from the bottom of the frame , pretty much all road bicycles are set up this way . This derailleur is quite rare now as Shimano stopped making all upper end front derailleur’s, 105 and above in 9 speed in 2007 and the new 10 speed ones only work with 10 speed drivetrain , making it a pain to upgrade parts on a 9 speed system. Now here are the technical details and why this derailleur is so special Shimano made a change in 2009 on the design of all their front derailleurs, so that they only work with very specific chain ring combinations that have a 11 tooth difference between the large ring and the middle ring , using the newer triple Shimano derailleurs on older chain ring combinations results in poor to nonexistent shifting . This 105 triple 9 speed front derailleur is much more versatile , designed to work on front chain rings with difference of 10 teeth between the large and middle ring, and a total max tooth difference of 22 teeth between the large and small rings. For example chain ring combinations 52-42-30, 52-39-30, 48-36-26, etc, work fine with this derailleur. You can see the difference between this derailleur and the new ones if you look and the shape of the inside cage, the new ones are much bigger and lower , this means they hit the middle chain ring when you try to use them outside of specifications they are narrowly designed for . This 105 triple front derailleur is new old stock (NOS), made in 2003, these originally where shipped from Shimano in bulk packaging for bicycle production so there may be a little scuffing here or there, from the way they where packaged by Shimano. These are brand new. This is the way they look when they are installed on new bicycles at the factory. Shimano coated these with corrosion protective oil / grease coating that has in some cases has become dried out , you may have to use a little solvent to clean it off if you care and want the chrome finish to shine to it's full potential . If you want a perfect jewel like finish you should buy a derailleur in aftermarket packaging and should probability be looking at the Dura-ace level of components where the finish is close as close to prefect as Shimano can make it in a production environment . these are compatible with all models of shimano road STI 9 speed shifters, and work with many chainring combination's that the new ones will not work with, These also make an excellent replacement for Shimano Sora FD-3304 & Tiagra FD-4403 derailleurs that have the spring braking issues as the 105 FD-5504 is a stronger design. If you want to look at the gritty details of Shimano derailleur specifications they are on their web site at http://techdocs.shimano.com/techdocs/index.jsp More derailleur knowledge this 9 speed derailleur will also work with a 7 or 8 speed drive train and shifters , but you may have a little more chain rub in the cross gears then you would if you had a 7 or 8 speed derailleur, this is due to the 7/8 speed chain being a little wider then the 9 speed chain , the cage on an 9 speed derailleur is also just fractionally narrower then cage on an 7or 8 speed derailleur . if you are replacing a lower quality 7 or 8 speed derailleur you will probably see much better shifting with this 105 9 speed because there is a lot less flex and play in this derailleur due to better materials and tighter production tolerances ,and that translates to more precise shifting . Shimano Road front derailleur's are designed only to be used with Shimano road shifter's (STI) , Shimano mountain front derailleur's are designed only to be used with mountain shifters , the pull ratios on the front derailleur's are different and will not work if you mix them up. Shimano also makes a R400s & 700s series of special front derailleur's that are n
Bontrager Arvada Comp
$89.99
Comfortable performance for road or trail Arvada Comp adds comfort and reduces soft tissue pressure by creating a strategic cut-out in the saddle shell. This allows the softer finishing material across the shell cut-out to be more compliant, resulting in added comfort for the rider. With Arvada Comp, you get the benefits of a cut-out saddle with the classic look and feel of a more traditional design. Key features - Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency - Channel Flex on bottom of shell for added compliance - Zone Density shell construction is strategically placed for optimal comfort and performance - Size Specific Curvature ensures each saddle is designed specific to its width - inForm BioDynamic products optimize your natural movement for sustained, higher performance
Bontrager SSR Grips
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
Bontrager Double Gel Cork Handlebar Tape
$21.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm
Bontrager Rear Mount Adjustable Kickstand
$24.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Bontrager Gel Cork Tape
$19.99 - $29.99
Key features: - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
Bontrager Isogel Bar Padding
$19.99
Add some serious cushioning to your road bars with Bontrager's Isogel Bar Padding. To cancel vibrations, sections of gel are placed on the handlebar tops and drops. Then you wrap over them with any handlebar tape of your choice (sold separately). There's enough Isogel for most road handlebars and the sections can be trimmed as needed.
Shimano UN55 Square Taper English Threaded Bottom Bracket
$23.99
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included
Greenfield KS5 Kickstand & Plate
$11.99
The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)
SRAM Force 22 Crankset
$268.00 - $303.00
SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.
Greenfield KS2 Kickstand
$9.99 - $10.49
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Surly Track Cog
$30.00 - $35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
Bontrager Comp VR-S Handlebar
$49.99
The Bontrager Comp VR-S road bar offers a shorter drop and reach, while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints. - Custom-butted, 6061-T6 alloy construction - Variable Radius- Short (VR-S) bar shape features a shallow drop with shorter reach, optimized for riders who prefer a less aggressive posture - Compatible with clip-on aero bars - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
Bontrager Gel Cork Handlebar Tape
$19.99
Bontrager's Gel Cork Handlebar Tape gives you a confident, comfortable grip on your handlebars. There's an inner gel strip that cuts down on vibrations and road chatter for serious long-ride comfort. The natural cork feels good with or without gloves too. It comes in a wonderful amount of colors so you can customize your ride and includes a set of Bontrager reflective bar end plugs and finishing strips.
Bontrager Drop Line Universal Dropper Lever
$24.99
Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost
Bontrager Eyeleted Seatpost Clamps
$11.99 - $13.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
Origin8 X-Tra Lift Stem Riser
$31.99 - $39.99
Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.
Origin8 Everland MX/GX Stem
$34.99
- High angle stems designed specifically for use with Monstercross or Gravel bikes equipped with off-road drop bars - Available in +25° and +40° versions and lengths from 60 to 130mm - 3D forged 6061 aluminum construction - Fork Dia: 1-1/8" - Bar Clamp: 31.8 - Color: Blk - Material: AL6061
Sunlite Adjustable Quill Stem
$23.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
Sunlite Alloy 350mm Seatpost
$19.99 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
Origin8 MaxFit Braze-On Front Derailleur Adapter
$11.99
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
Sunlite Steel 1-inch Threaded Headset
$6.99 - $14.99
- Steel cups - Steel retainer bearings - Available in chrome or black - Steerer Dia: 25.4mm - Cup Dia: 30mm
Sunlite Adjustable Threadless Stem
$36.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.
Dimension Two-Bolt Seatpost
$24.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
Dimension 31.8mm Threadless Stem
$29.99 - $32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Dimension Lockring
$8.99
Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs
Kalloy 602 Seatpost
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
Kool-Stop Campagnolo Replacement Pads
$23.95
These are excellent replacements for Campagnolo brakes of the Classic Nuovo Record era (1970s-80s.) They also fit Mafacn and other shoe holders. The dovetail fitting is 12mm wide, 9mm at the narrow section. Overall length, 40mm. - Black - Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Sold in packages of four
TerraTrike 24-inch Rear Fender - Extended Width
$69.95
- Deluxe wide rear fender for 24" (507) wheels - Designed for use with the Rambler A.T. (1.95"-2.25" wide tires) - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Flat black fender with black hardware
Page 1 of 9 Next page