Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$12.00 $15.00 20% Off
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$18.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$18.00 - $31.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$21.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$25.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$42.99
Free shipping on this item NOTE: the French part being sold is the quill pictured (silver part in first photo ) the threadless stem (black part in other photos) is not included it is there to demonstrate how the quill works with the stem . Make your French bicycle work with any modern threadless Ahead style stem! Most older French bicycles use a 22.0 mm stem size that is not compatible with more standard 22.2mm quill stem size , the 22.0 size was discontinued in the 1980’s this makes it almost impossible to find stems for these unique machines . This quill adapter is machined to fit classic French bicycles that have the 22.0 stem size, it fits 1 1/8in ahead threadless stems that are found on most new bicycles. the quill is aluminum 7075 alloy , I can machine the stem to work with the 1in threadless clamp stems , if you need this make sure to make a note of it when you purchase the adapter. A few notes 1. The clamping area for the stem on the adapter is 40mm, most stems fit this, with some bulkier clamp designs may hang over a bit, as long a both bolts are clamping over the quill you are fine. 2. Stems have minimum amount of the quill that needs to be in the fork, this quill needs to be inserted 70mm in to the fork. 3. Most French stems that we have measured where actually made to 21.8mm diameter which allowed them to fit into the forks, as the variances in the production tolerances of the bicycle manufactures at that time often would mean some forks where 21.9 and others 22.0, I have chosen to match the 21.8 size that I have found on most of the stems I have measured. 4. Always grease the quill when you insert it in to the steertube of the fork. 5. here is a short youtube clip on these stems http://www.youtube.com/watch?v=FuVi170R3cs Some common vintage brands that used French threads where Peugeot , Astra , Motobecane & Mercier ( the current inexpensive Chinese made bicycles with these name are not the same company’s as the original French manufactures ) , Gitane , Jeunet , Stella, etc
$24.99
- Chromoly construction - Classic BMX Lay-back design - Material: Cro-Mo
$2.99
Bar end plugs (2)
$4.99
Improve the performance of your shifting with fresh cable and housing. - Entry-level cable and housing set is great for servicing heritage bikes on a budget - Galvanized cable is corrosion resistant and comes pre-stretched - Includes one 1900mm cable and 1750mm of outer housing
$4.99
- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof
$6.49
Rejuvenate the performance of your mountain or town brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with most non-hydraulic mountain bike and city brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
$6.49
Rejuvenate the performance of your road brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
$6.49
Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
$6.99
Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs
$9.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
$11.99 - $13.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
$19.98 - $19.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
$19.99
- Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing;Bright color provides added visibility - Gel Cork Tape has a thickness of 2.7mm
$19.99 - $29.99
Instantly add comfort to your existing saddle with a cushy Bontrager Gel Saddle Cover. Rubberized on the underside to help it stay firmly in place, Bontrager's Gel Saddle Cover installs in seconds, thanks to a drawstring and toggle closure retention system.
$19.99
Add some serious cushioning to your road bars with Bontrager's Isogel Bar Padding. To cancel vibrations, sections of gel are placed on the handlebar tops and drops. Then you wrap over them with any handlebar tape of your choice (sold separately). There's enough Isogel for most road handlebars and the sections can be trimmed as needed.
$19.99
Get back on the road with a replacement handlebar for your cruiser bike. Customize your bike with a new handlebar that fits your own personal style. PRODUCT DETAILS - Traditional 35 degree back sweep handlebar - 6061-T6 polished aluminum with anodize finish - RIDE+ versions have an integrated cable guide inside
$21.99
Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. Kit includes lubed housing, pre-stretched stainless steel cables, ferrules, cable frame protectors, and cable end caps for front and rear brakes. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2750mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched
$21.99
Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Diameter: 4mm
$21.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm
$24.99
- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use
$24.99
Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost
$24.99
Lock on to the trail Confidently handle any trail with the XR Elite mountain bike grip. This 30mm single lock-on grip features core lock clamps to hold tight on any terrain, and the perfect combination of rubber compound and tread design adds comfort and confidence on any trail. Key features - Tread and rubber compound provide secure grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 30mm diameter
Page 1 of 9 Next page