Replacement chainstay cover for DuoTrap S Digital Sensor

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

Replacement chainstay cover for DuoTrap S Digital Sensor

Frame Cover fills chainstay pocket when sensor is removed.

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence, and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6mph

Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side

Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look

- Sliding closure helps keep sweat and precipitation away from valuables - Large, clear, center window allows easy operation of touch screen - Compatible with most smartphones - 7.5"" (19cm) x 4.5"" (11cm) wide

Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories

Easily mount your computer in the fastest, most aero position possible with the Bontrager Speed Concept Mount. • Computer mount for the 2014 Speed Concept • Mounts to all mono extensions creating a faux bar for any standard handlebar-mount cycling computer

This handy accessory mount can be installed on the boom of your TerraTrike. Perfect for accessories like headlights, iPod mounts, computers, etc. Compatible with any TerraTrike except the Rover model. - Designed specifically for mounting on the booms of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.

This handy accessory mount can be installed in multiple locations on the handle bar of your TerraTrike. Perfect for accessories like computers, bells, horns, etc. Compatible with all TerraTrikes, but best used on the Rover, Rambler, or Sportster models with direct steer handlebars. - Designed specifically for mounting on the handlebars of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

Power meter battery lid and cover for Quarq eTap AXS Force 2x/1x & Red 1x.

The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike. - Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.) - Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc. - Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included) - Can be attached to the water bottle bolts or a separate water bottle bracket - Use on a bicycle, golf cart, stroller, ATV/UTV

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black