Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Everything you need for installing your integrated rear mounted kickstand.

Features
- Includes both M5 and M6 hardware
- See kickstand diagram for proper assembly

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Park your bike with the genuine Fetch+ 2 kickstand hardware.

Features
- Includes M8 mounting bolt
- Powder coated finish for high durability

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

When it's time to refresh or upgrade your seatpost, Trek Genuine Replacement Parts have you covered.

Features
- Spacers that reduce travel for Bontrager DropLine 31.6mm dropper seatposts
- For riders who need a shorter seatpost or travel for their fit
- Spacers are not 'stackable' to create greater travel reductions
- Not forwards compatible with any generation of Line or Line Elite Dropper posts
- Refer to the Service Manual for assembly & service instructions

Get back on the trail with genuine replacement dropper post parts.

Features
- Not compatible with Line Elite 31.6mm post
- Regular maintenance of the Line Dropper will help maintain performance
- Tighten to 4nm

Original replacement hardware for your e-bike system.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware not included

The right parts for the right bike.

Features
- Refer to service manual for assembly instructions and service
- Threadlocker patches and coatings may effect cost versus untreated bolts
- Confirm correct length before ordering, several lengths may be available
- ISO 14581

Original replacement hardware for your bike.

Features
- Threadlocker patches and coatings may effect cost versus untreated bolts
- Confirm correct length before ordering, several lengths may be available
- Do not use on storage door assemblies that may need a longer bolt
- E-bikes with downtube batteries may require a maximum length
- Refer to the Service Manual for assembly & service instructions

Keep your fenders in safe working order with regular service and replacement.

Features
- Bend Locking tab after installation
- Bolts sold separately
- Only assemble with original bolts

Keep your fenders in safe working order with regular service and replacement.

Features
- Fender wire sheath retention
- Fits on the inside of the Trek Allant+ and Diamant Zouma+ rear fender

For proper assembly.

Features
- Spacer height: 10mm
- Contains 1pc
- Compatible with Trek Super Commuter
- Compatible with Diamant Zouma+ 2018 / 2019

For proper assembly.

Features
- Spacer height: 4mm
- Contains 1pc
- Compatible with Trek Super Commuter
- Compatible with Diamant Zouma+ 2018 / 2019

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Original replacement stem hardware for your Allant+.

Features
- Allows for proper headset adjustment
- Required for safe operation

- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub

Genuine replacement parts Ensure your battery stays properly in place. Genuine battery mounting accessories and replacement parts. - Contains: Lower- and Upper Bracket and RIB Bumper - Hardware not included

Keep your fenders in safe working order with regular service and replacement.

Features
- For proper assembly
- Holds fender in place

Features
- Replacement Madone 9 chainkeeper and hardware
- For use with Madone 9

The right parts for the right bike.

Features
- Refer to Service Manual for assembly instructions and service
- For select lower shock mount assemblies
- First used on Slash 29 2017-2020

Bar end plugs stop-up the open ends of the handle bars and are installed to prevent serious injury in the case of a fall. These are replacement parts for the bar end plugs.

When it's time to refresh or upgrade your seatpost, Trek Genuine Replacement Parts have you covered.

Features
- Designed for Line 31.6 Gen 3 dropper seatpost
- Not cross compatible to Line Elite 31.6 dropper seatpost
- Not backwards compatible with any generation of 31.6 dropper seatposts
- Spacers are not 'stackable' to create greater travel reductions
- Refer to the Service Manual for assembly & service instructions

Easily mount NCS fenders to your disc brake equipped bike with this simple adapter.

Features
- Disc brake adapter for NCS fenders
- This part makes NCS fenders better fit disc brake bikes

This fastener is used on size Small and Medium frames of the Rail 9.9 & 9.8 2022 models to help clear a shock and bottle cage.
Install on the lower water bottle cage mount hole only.

Features
- Use with Rail Carbon 29 2022 Bottle Cage Spacer
- Do not use on sizes Large and X-Large

The right parts for the right bike.

Features
- Designed for 2023 Rail Aluminum
- Refer to Service Manual for assembly instructions and service
- Hardware sold separately

Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur. Get your cables under control. Product details First used on Slash+ Leave removable tab in place for AXS shifting Hardware not included Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Securely attaches Slash+ speed sensor to the chainstay. Trek proprietary cable management system. Product details Designed for Slash+ Fasten with M4x0.7x6mm button head screw 6.3mm inner diameter clamping area Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Original replacement routing cover for your aerobar.

Features
- For optimal aerodynamic position
- Integrated design